• LCD Display Module LCD1602 16 Character  LCM Liquid Crystal Module 3.3V 5.0V
    {{0}}%
    OFF
    $  0.00 $  4.8

    LCD1602 2 line 16 characters LCD Display LCM display module 3.3V 5.0VThis is a high quality 16 character by 2 line intelligent display module, with back lighting, Works with almost any microcontroller.Features:16 Characters x 2 LinesModel : 1602ASpecies :The LCD screenThe screen size : 2.4 (inches)color :Blue screenBrightness :The highlightedContrast : AdjustablePixel :16 * 2Distance : 0.55 * 0.60 (mm)The response time : 0.01 (ms)Viewing Angle :(180 °)Specification:

  • interface expansion board Edge Breakout for micro:bit adapter board IO expansion board
    {{0}}%
    OFF
    $  0.00 $  15.99

    interface expansion board Edge Breakout for micro bit  adapter board IO expansion boardIntroduction:I am an interface expansion board specially designed for micro:bit, which expands the 2.54mm pitch pin header interface for  micro:bit to facilitate various experiments.Parameters :Dimensions: 82.05mm × 36.10mmThrough hole diameter: 2mmFamily                                                         Interface  Board    

  • Antenna Wifi module 2.4G 5G 5.8G multifrequency PCB 5dB Antenna with IPEX interface 146153-Series   1461530250
    {{0}}%
    OFF
    $  0.00 $  0.6

    Name : 2.4G 5G 5.8G multifrequency PCB 5dB Antenna Wifi module with IPEX interface 146153-Series   1461530250Description:Standing wave ratio definition: S.W.R <= 2.0 @ 2400 MHz ~ 2700 MHz                                                    S.W.R <= 2.0 @4900 MHz ~5900 MHzGain definition: 5dBi ( *Typical* )Band definition: 2400 MHz ~ 2700 MHz@4900 MHz ~5900 MHzImpedance definition: 50 ohmOperation Temperature - 40 °C ~ + 65 °CStorage Temperature - 40 °

  • RB-02S046 flex Sensor Robotic Electronic Gloves Recommended for Arduino
    {{0}}%
    OFF
    $  0.00 $  15.89

    RB-02S046  2.2 Bending  flex Sensor Robotic Electronic Gloves Recommended for  Arduino The Flex Sensor By Spectra Symbol is a simple sensor for measuring bending strength. With an ultra-thin package, it can be attached to the surface to be measured, and the analog output is convenient for collecting and processing the bending information. The total length of 80mm is as long as 60mm, and the controller with AD conversion is especially suitable for finger bending detection, robots, medical equipment, musical instruments and other products.Specifications:1. Product Name:

  • Mini USB Host Shield 2.0 ADK SLR Module Development Tool
    {{0}}%
    OFF
    $  0.00 $  6

    Mini USB Host Shield 2.0 ADK SLR Module Development ToolDescription: 1. Support Google for Android ADK, support Android phones: G1, Nexus One, Nexus S, Droid X.     (Mobile systems need to be upgraded to Android 2.3.4, tablets need to be upgraded to Android 3.1)2. Provide the APK package and compile the source file ADK3. Compatible with the following hardware of arduino:      For arduino Uno 328      For arduino Diecimila / Duemilanove 328      Suitable for arduino Mega 2560 (recommended)      For arduino Mega 1280

  • LNA 50-4000MHz RF Low Noise Amplifier SPF5189
    {{0}}%
    OFF
    $  0.00 $  10.99

    SPF5189 RF Low Noise Amplifier LNA 50-4000MHz Specification :LNA:50-4000mhzNF:SPF5189ZLNA0:0.6 dBAmplifier:FMSize :34 x 25mm / 1.33 x1.0inchWeight :10gFeature:This RF amplifier has a low noise figure and is an LNA RF amplifier.A high frequency or intermediate frequency preamplifier that is commonly used as a variety of radio receivers, as well as an amplifying circuit for high sensitivity electronic detection equipment.In the case of amplifying a weak signal, the noise of the amplifier itself may be very severe, so it is desirable to reduce this noise to improve the signal-to-noise

  • GY-471 MAX471 3A Range Current Sense Module Sensor Current Measurement GY-471_MAX471
    {{0}}%
    OFF
    $  0.00 $  1.83

    GY-471 MAX471 3A Range Current Sense Module Sensor Current MeasurementDescription:This module can be used to test the current and voltage.The principle of voltage test based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller. analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V). AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V/1023), so the minimum voltage of input voltage

  • GY-213V-HDC1080 High Accuracy Digital Humidity Sensor module with Temperature Sensor,HDC1080 module Low Power
    {{0}}%
    OFF
    $  0.00 $  6.26

    GY-213V-HDC1080 High Accuracy Digital Humidity Sensor module with Temperature Sensor,HDC1080 module Low Power 

  • Programming serial interface module chip AD9833 sine wave signal generator DDS module GY-9833
    {{0}}%
    OFF
    $  0.00 $  3.85

    Programming serial interface module chip AD9833 sine wave signal generator DDS module GY-9833AD9833 sine wave signal generator DDS module GY-9833General description:The AD9833 is a low power, programmable capable of producing sinusoidal waveform generator, triangular, and square wave outputs. Generation is required in various types of waveform detection, implementation, and time domain reflectometry (TDR) applications. the output frequency and phase are programmable software, allowing easy tuning. without external components are needed. The frequency registers are 28 bits wide: with a 25MHz

  • VL6180X Time-of-Flight Distance Sensor GY-6180 VL6180X  Light sensor, ranging, gesture recognition
    {{0}}%
    OFF
    $  0.00 $  6.5

    VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator GY6180 for ArduinoGY-6180 VL6180X  Light sensor, ranging, gesture recognitionFeatures:2.8V Regulator - Provides the required 2.8V for the sensorI2C Level Shifter - Provides logic level conversion from 2.8V to VCC3-in-1 ModuleIR EmitterRange SensorAmbient Light SensorMeasures absolute range up to 10cmGesture RecognitionI2C InterfaceTwo Programmable GPIOSharp Sensor Board LayoutDescription:VIN This is the main 2.7 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.GND

  • Heart Rate Click Sensor GY-MAX30100 Heart Rate Oxygen Concentration Sensor Module MAX30100
    {{0}}%
    OFF
    $  0.00 $  4.55

    Heart Rate Click Sensor GY-MAX30100 Heart Rate Oxygen Concentration Sensor Module MAX30100Heart Rate Click Sensor GY-MAX30100Main integrated circuits : MAX30100Voltage  : 3-5VSize :14mm*14mmCommunication protocol :I2CDescription:Heart Rate click carries Maxim’s MAX30100 integrated pulse oximetry and heart-rate sensor. It’s an optical sensor that derives its readingsfrom emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through aphotodetector. This particular LED color combination is optimized for reading the data

  • 6 axis attitude acceleration gyroscope GY-6500 MPU6500 6DOF Sensor Modules
    {{0}}%
    OFF
    $  0.00 $  3.19

    6 axis attitude acceleration gyroscope GY-6500 MPU6500 6DOF Sensor Modules  GY-6500 MPU6500 6DOF Sensor ModulesMain Features:● This module contains 16-bit ADC output of 3 axis accelerator and 3 axis gyro● Model: GY-6500● Chip: MPU6500● Power voltage: 3 - 5V● Communication mode: I2C / SPI● Gyro range: + / -250, + / -500, + / -1000, + / -2000dps● Accelerator range: + / -2G, + / -4G, + / -8G, + / -16G● Register: 1MHz● SPI / I2C: 400KHz● Gyro working current: 3.2mA● Gyro sleeping current: 8uA● Accelerator working current: 450uA● Accelerator sleeping current: 8uA●

  • GY-9960-LLC Gesture sensing sensor module APDS-9960 RGB touchless gesture sensor motion direction recognition module
    {{0}}%
    OFF
    $  0.00 $  2.55

    GY-9960-LLC Gesture sensing sensor module APDS-9960 RGB touchless gesture sensor motion direction recognition moduleName :GY-9960-LLCMain IC part number :APDS-9960Voltage  :3-5vCommunication method: IIC communication protocolSize:13.5mm*13.5mmDescription: This is the  RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your

  • STEVAL-SPIN3201 STM32 Development board-DC motor driver board based on the STSPIN32F0 and STD140N6F7 MOSFETs.
    {{0}}%
    OFF
    $  0.00 $  65.33

    STEVAL-SPIN3201 STM32 Development boardThe STEVAL-SPIN3201 board is a three-phase brushless DC motor driver board based on the STSPIN32F0 and STD140N6F7 MOSFETs.The device provides an affordable and easy-to-use solution for the implementation of low voltage motor driving applications such as fans, drones and power tools.The board is designed for sensored or sensorless vector control - FOC algorithms with 3-shunt sensing.Key Features:Input voltage from 8 V to 45 VOutput current up to 15 ArmsPower stage based on STD140N6F7 MOSFETsEmbedded 3.3 V buck regulatorEmbedded 12 V LDO regulator3-shunt

  • STM32 Nucleo-144 development board with STM32F303ZE MCU supports Arduino  ST Zio,morpho connectivity_NUCLEO-F303ZE
    {{0}}%
    OFF
    $  0.00 $  25.99

    NUCLEO-F303ZE    STM32 Nucleo-144 development board with STM32F303ZE MCU, supports Arduino, ST Zio and morpho connectivityThe STM32 Nucleo-144 boards provide an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, by choosing from the various combinations of performance, power consumption, and features. The ST Zio connector, which is an extension of Arduino™ Uno V3, provides access to more peripherals while ST morpho headers provide an easy means of expanding the functionality of the Nucleo open development

  • MQ-3B alcohol sensor with Sensor alcohol detection MQ-3
    {{0}}%
    OFF
    $  0.00 $  1.2

    MQ-3 alcohol sensor:The gas-sensitive material used in the semiconductor alcohol sensor MQ-3B is tin dioxide (SnO2) with low conductivity in clean air. When alcohol vapor is present in the environment in which the sensor is located, the conductivity of the sensor increases as the concentration of alcohol in the air increases. The change in conductivity can be converted to an output signal corresponding to the gas concentration using a simple circuit. The MQ-3B gas sensor is highly sensitive to alcohol and is resistant to gasoline, smoke, and water vapor. This sensor detects multiple

  • {{ item.displayed_price.unit_prefix }}  {{ item.displayed_price.min }}

view {{page_size}}

view more
loading
no more data
No results
{{basedata.product_data.count}} Results

Sort by :{{pop_rules}}

Sort by :Popularity

Price: Low to High

Price: High to Low

Newest First

Popularity

Filter

{{cate.name}}

Currency: USD
USD - US Dollar
EUR - Euro
GBP - British Pound
CAD - Canada Dollars
AUD - Australia Dollars
JPY - Japan Yen
SEK - Sweden Kronor
NOK - Norway Kroner
IDR - Indonesia Rupiahs
BRL - Brazil Reais
RUB - Russia Rubles
THB - Thailand Baht
AED - Arab Emir. Dirham
Need Help?
Chat live with us
Request Quote
Want to call?

86-755-83677732

Skype Me
Track Order
Want to check the status of your order? You can put in your order number and click track order to find the tracking information or login your account to check the detail information.
order number
  • order number
  • tracking number