Name : 2.4G 5G 5.8G multifrequency PCB 5dB Antenna Wifi module with IPEX interface 146153-Series 1461530250Description:Standing wave ratio definition: S.W.R <= 2.0 @ 2400 MHz ~ 2700 MHz S.W.R <= 2.0 @4900 MHz ~5900 MHzGain definition: 5dBi ( *Typical* )Band definition: 2400 MHz ~ 2700 MHz@4900 MHz ~5900 MHzImpedance definition: 50 ohmOperation Temperature - 40 °C ~ + 65 °CStorage Temperature - 40 °
RB-02S046 2.2 Bending flex Sensor Robotic Electronic Gloves Recommended for Arduino The Flex Sensor By Spectra Symbol is a simple sensor for measuring bending strength. With an ultra-thin package, it can be attached to the surface to be measured, and the analog output is convenient for collecting and processing the bending information. The total length of 80mm is as long as 60mm, and the controller with AD conversion is especially suitable for finger bending detection, robots, medical equipment, musical instruments and other products.Specifications:1. Product Name:
Mini USB Host Shield 2.0 ADK SLR Module Development ToolDescription: 1. Support Google for Android ADK, support Android phones: G1, Nexus One, Nexus S, Droid X. (Mobile systems need to be upgraded to Android 2.3.4, tablets need to be upgraded to Android 3.1)2. Provide the APK package and compile the source file ADK3. Compatible with the following hardware of arduino: For arduino Uno 328 For arduino Diecimila / Duemilanove 328 Suitable for arduino Mega 2560 (recommended) For arduino Mega 1280
GY-471 MAX471 3A Range Current Sense Module Sensor Current MeasurementDescription:This module can be used to test the current and voltage.The principle of voltage test based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller. analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V). AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V/1023), so the minimum voltage of input voltage
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor module with Temperature Sensor,HDC1080 module Low Power
Programming serial interface module chip AD9833 sine wave signal generator DDS module GY-9833AD9833 sine wave signal generator DDS module GY-9833General description:The AD9833 is a low power, programmable capable of producing sinusoidal waveform generator, triangular, and square wave outputs. Generation is required in various types of waveform detection, implementation, and time domain reflectometry (TDR) applications. the output frequency and phase are programmable software, allowing easy tuning. without external components are needed. The frequency registers are 28 bits wide: with a 25MHz
VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator GY6180 for ArduinoGY-6180 VL6180X Light sensor, ranging, gesture recognitionFeatures:2.8V Regulator - Provides the required 2.8V for the sensorI2C Level Shifter - Provides logic level conversion from 2.8V to VCC3-in-1 ModuleIR EmitterRange SensorAmbient Light SensorMeasures absolute range up to 10cmGesture RecognitionI2C InterfaceTwo Programmable GPIOSharp Sensor Board LayoutDescription:VIN This is the main 2.7 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.GND
Heart Rate Click Sensor GY-MAX30100 Heart Rate Oxygen Concentration Sensor Module MAX30100Heart Rate Click Sensor GY-MAX30100Main integrated circuits : MAX30100Voltage : 3-5VSize :14mm*14mmCommunication protocol :I2CDescription:Heart Rate click carries Maxim’s MAX30100 integrated pulse oximetry and heart-rate sensor. It’s an optical sensor that derives its readingsfrom emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through aphotodetector. This particular LED color combination is optimized for reading the data
6 axis attitude acceleration gyroscope GY-6500 MPU6500 6DOF Sensor Modules GY-6500 MPU6500 6DOF Sensor ModulesMain Features:● This module contains 16-bit ADC output of 3 axis accelerator and 3 axis gyro● Model: GY-6500● Chip: MPU6500● Power voltage: 3 - 5V● Communication mode: I2C / SPI● Gyro range: + / -250, + / -500, + / -1000, + / -2000dps● Accelerator range: + / -2G, + / -4G, + / -8G, + / -16G● Register: 1MHz● SPI / I2C: 400KHz● Gyro working current: 3.2mA● Gyro sleeping current: 8uA● Accelerator working current: 450uA● Accelerator sleeping current: 8uA●
GY-9960-LLC Gesture sensing sensor module APDS-9960 RGB touchless gesture sensor motion direction recognition moduleName :GY-9960-LLCMain IC part number :APDS-9960Voltage :3-5vCommunication method: IIC communication protocolSize:13.5mm*13.5mmDescription: This is the RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your
MQ-3 alcohol sensor:The gas-sensitive material used in the semiconductor alcohol sensor MQ-3B is tin dioxide (SnO2) with low conductivity in clean air. When alcohol vapor is present in the environment in which the sensor is located, the conductivity of the sensor increases as the concentration of alcohol in the air increases. The change in conductivity can be converted to an output signal corresponding to the gas concentration using a simple circuit. The MQ-3B gas sensor is highly sensitive to alcohol and is resistant to gasoline, smoke, and water vapor. This sensor detects multiple
SHT31-D SHT31 Humidity and Temperature Sensor Module:Product Summary:SHT3x-DIS is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperature platform.The SHT3x-DIS has increased intelligence, reliability and improved accuracy specifications compared to its predecessor. Its functionality includes enhanced signalprocessing, two distinctive and user selectable I2C addresses and communication speeds of up to 1 MHz.The DFN package has a footprint of 2
view {{page_size}}
Sort by :{{pop_rules}}
Sort by :Popularity
Price: Low to High
Price: High to Low
Newest First
Popularity
Categories
{{cate.name}}
{{cate.name}}